HOME > SUPPORTLog In
Maptech Support
Support Home > Sea Ray Navigator > Technical Documents > When turning on the Navigation Computer I get an error message saying "computer was not shut down properly."






TITLE  (printable format) (email this document)

When turning on the Navigation Computer I get an error message saying "computer was not shut down properly."

Created: 12/12/2003

TOPIC

This message will come up if the system was not properly shut down


DISCUSSION

To avoid seeing this message, always shut down the computer by using the commands in the NavPanel or in the Sea Ray Navigator chart plotter.

In the NavPanel, press the Shut Down button.

In the chart plotter, press Exit, Exit Sea Ray Navigator. This will bring you to the NavPanel, press Shut Down.

Shutting down any other way (for example, cutting the power off while the system is running) can cause issues to arrise (same as if you were to unplug a home PC while running).





 


© 1989 - 2014 Maptech, Inc., All Rights Reserved. Maptech ® is a registered trademark of Maptech, Inc.

TERMS AND CONDITIONS