TOPIC

Contour 3D: "No Chart Coverage" Message

DISCUSSION

If you have installed a Marine Navigator region and see this message, try the following:

1) Right-click on the NOAA chart.

2) Choose "Put Vessel Here." A vessel icon should display on top of the chart.

3) Choose Charts > Link to Contour Chart. This should display a window showing the Contour Chart of the same area. If you move the vessel, the Contour chart will also move.

If you still see a "No Chart Coverage" message, but think the area should have 3D coverage, follow this procedure:

1) Close Offshore Navigator

2) Reinstall the Marine Navigator region. Start with the Offshore Navigator Installer CD and follow the on-screen instructions. This will start the installation sequence which includes installing the Contour 3D Charts. (Note: There is no need to uninstall anything before reinstalling.)