HOME > SUPPORTLog In
Maptech Support
Support Home > Model 300 (312 & 315) Autopilot Cable Installation Instructions






TITLE  (printable format) (email this document)

Model 300 (312 & 315) Autopilot Cable Installation Instructions

Created: 06/15/2006
Modified: 01/11/2007

DISCUSSION

The autopilot cable has been revised to correct a problem when connected to certain autopilots, VHF radios, or NMEA data repeaters. Symptoms of this problem include loss of GPS and depth output when the Navigator’s chartplotter application is not running. These cables carry the part numbers 305-0204, 305-0204-S, 305-0205, 305-0205-S, and 305-0206.

Related Technical Documents
- NMEA/Autopilot Output from Maptech Navigation Computers
- Model 300 (312 & 315) COM Port I/O High Speed Compass Input Cable - Installation Guide

Acrobat Reader Required
If you don't have Adobe Acrobat Reader, you can download it at www.adobe.com.

DOWNLOADS
 
 File Name 
 File Size 
 Version 
 Release Date 
 Requirements 
  
  31.50 KB 
 For Model 312 and 315 Navigation Computers  
 06/15/2006 
Requires Adobe Acrobat Reader





 


© 1989 - 2014 Maptech, Inc., All Rights Reserved. Maptech ® is a registered trademark of Maptech, Inc.

TERMS AND CONDITIONS