DOWNLOADS
Introduction
These .PDF files indicate the various dimensions, configuration diagrams, and other important information for mounting an i3 Navigation Computer in the dashboard of a vessel.


Model 315 Cutout
This document can be printed on "ANSI D" (34x22) paper to produce an 'actual size' template for cutting a dashboard for installing a Model 315 Navigation Computer. Alternatively, it can be printed on whatever size paper available - and scaled appropriately. It also shows the screw locations. Two versions of this document are presented - one with dimensions printed and the other with the dimensions omitted (for use as a cutting template.)


Model 300 (312 or 315) Inter-Connect Guide - i3 (Single) & (Dual)
This document illustrates the various accessories available for the i3 and indicates how they are interconnected into the system. It also indicates the various Maptech part numbers for each of the cables and accessories that an installer may need in order to properly hook up a system. A dual-station Inter-Connect Guide is also available.


Model 300 (312 or 315) IO Layout
The IO layout indicates the locations and purpose of each port found on the bottom of the Navigation Computer. Pin outs for each port are also included.


Acrobat Reader Required
If you don't have Adobe Acrobat Reader, you can download it at www.adobe.com.

	File Name	File Size	Version	Release Date	Requirements
	Model 315 Cutout with dimensions.pdf	139.06 KB	for Model 315 Navigation Computers	10/18/2006	Requires Adobe Acrobat Reader.
	Model 315 Cutout without dimensions.pdf	78.18 KB	for Model 315 Navigation Computers	10/18/2006	Requires Adobe Acrobat Reader.
	305-0905-15 Interconnect - Single.pdf	438.27 KB	for Model 312 & 315 Navigation Computers	05/22/2007	Requires Adobe Acrobat Reader.
	Model 300 IO Layout.pdf	301.40 KB	for Model 312 & 315 Navigation Computers	02/03/2006	Requires Adobe Acrobat Reader.
	305-0808-15 Interconnect - Dual.pdf	600.68 KB	for Model 312 & 315 Navigation Computers	05/22/2007	Requires Adobe Acrobat Reader.