HOME > SUPPORTLog In
Maptech Support
Support Home > i3 Touch Screen Command > Technical Documents > Type II Navigation Computer - Sonar / 3D Fish Finder Option - Installation Guide






TITLE  (printable format) (email this document)

Type II Navigation Computer - Sonar / 3D Fish Finder Option - Installation Guide

Created: 03/29/2007
Modified: 03/29/2007

DISCUSSION

This is the current Type II Hardware Installation Guide for the Sonar/Fish Finder. While this same .PDF document was included with your transducer, we also offer it here for your convenience.

This document includes the descriptions of the equipment setup, instructions for mounting the transducer, fish finder interface box, and cable connections, as well as wiring diagrams and troubleshooting tips.

Note to "Sea Ray Navigator" Customers
The attached documentation refers to the i3 Navigator. In fact, both the Sea Ray Navigator and the i3 Navigator system are identical for this purpose, and share the same configuration in this regard.

Adobe Acrobat Required
If you don't have Adobe Acrobat Reader, you can download it at www.adobe.com.

DOWNLOADS
 
 File Name 
 File Size 
 Version 
 Release Date 
 Requirements 
  
  7.44 MB 
 for Type II Navigation Computers 
 08/15/2005 
Requires Adobe Acrobat Reader.





 


© 1989 - 2014 Maptech, Inc., All Rights Reserved. Maptech ® is a registered trademark of Maptech, Inc.

TERMS AND CONDITIONS