These .PDF files indicate the various dimensions, configuration diagrams, and other important information for mounting a Maptech Navigation Computer in the dashboard of a vessel.
Model 315 Cutout
This document can be printed on "ANSI D" (34x22) paper to produce an 'actual size' template for cutting a dashboard for installing a Model 315 Navigation Computer. Alternatively, it can be printed on whatever size paper available - and scaled appropriately. It also shows the screw locations. Two versions of this document are presented - one with dimensions printed and the other with the dimensions omitted (for use as a cutting template.)
Model 312 (and 315) IO Layout
The IO layout indicates the locations and purpose of each port found on the bottom of the Navigation Computer. Pin outs for each port are also included.
Model 300 (312 or 315) Inter-Connect Guide - Sea Ray (Single) & (Dual)
This document illustrates the various accessories available for the Sea Ray Navigator and indicates how they are interconnected into the system. It also indicates the various Maptech part numbers for each of the cables and accessories that an installer may need in order to properly hook up a system. A dual-station Inter-Connect Guide is also available.
Please Note: The "i3" branded version of these Inter-Connect Guides are more up-to-date. For the i3 edition, please click here.
Acrobat Reader Required
If you don't have Adobe Acrobat Reader, you can download it at www.adobe.com.